EUCOL U2836 - U-Disk Manage Performance; Operation Steps for File Management

U2836 Operation Manual Chapter 4 System and FILE
36
 Im
 DEV A
 DEV B
 REF A
 REF B
 Control and set parameters on <BIN DISP> page
 BIN COUNT (ON/OFF)
 Control and set parameter on <LIMIT SETUP> page
 PARAM (swap parameter)
 NOM
 MODE (%-TOL/ABS-TOL/SEQ-MODE)
 AUX (ON/OFF)
 COM (ON/OFF)
 High and low limits of each bin
4.2.2 U-disk manage performance
As described above, U2836 has a standard configuration of USB HOST interface,
so the external U-disk can be used as the memory media. In this condition, it
breaks the memory limit of 100 groups of *.EST files. Meanwhile those files can
be copied to IBM PC or compatible desk-top computer, laptop with USB interface
to reach the infinite extension.
U2836 supports the USB memory devices as below:
 Meet the USB 1.0/1.1 standard
 Capacity: 32MB/64MB/128MB/256MB
 File format: FAT32(Format the USB memory on Microsoft Windows operation
system)
4.2.3 Operation steps for file management
A. Save the following control and setting parameters to a file by the
following steps
1) Select and set all control and setting parameters on the desired page.
2) Press [FILE], the following soft keys will be displayed.
 LOAD
 SAVE
 DELETE
 COPY
 RENAME
 EXIT
3) In the file list, move the cursor to the file-saved position or input the file
number directly.
4) Press SAVE, the following soft keys and “File name：”will be displayed.
 ESC