47
5. PASSWD
Input the password if the SMTP server requires Authentication.
6. RECEIV. EMAIL ADDR
Input the e-mail address for receiving e-mail messages when the EVENT is enabled and triggered.
Example: In Motion Setup Menu, if the “EMAIL/NETWORK” is set to “YES”, this e-mail
address will receive a message and a still image (in “ARV” format) from the DVR when Motion
is triggered. This “ARV” file can be played back by opening “DVRViewer.exe” which can be
downloaded from the DVR’s Network Viewer or from the Copy Menu.
7. SENDER EMAIL ADDR
Input sender’s e-mail address, so that receiver can recognize the sender when an event message is
sent out.
3.7.4 PASSWORD
In the PASSWORD of the NETWORK SETUP MENU,we define:
Diagram 3.13
In the PASSWORD of the NETWORK SETUP MENU,we define:
Name/Password/Level: This category is to set up the users that will log into the network. Please
remember that this portion of the Network setting menu is set up in column format.
The default User Name = ADMIN
The default Password = 11111111
To Next Page
Loading...
