69
Note:
1. If you want to record event activity (motion or alarm) ONLY, set the normal record speed as 0 IPS
in the CAMERA SETUP MENU.
2. If the recording speed is changed while the machine is recording, the new recording speed will not
take effect until recording is stopped completely.
4.4 ALARM INPUT RECORDING (Input trigger)
DVR provides a record function which is triggered by external signal via the 19th pin of the ALARM
INPUT / OUTPUT port. When the record input signal is triggered constantly, DVR will start to
record according to the speeds set on Time Period (TP) N. The system will stop recording when the
record input signal is no longer triggered.
To Next Page
Loading...
