59
4. NETWORK ALARM
YES: To enable network alarm.
NO: To disable network alarm.
5. SEND EMAIL
YES: Send an email when HDD’s temperature is overheated.
NO: Will not send an email when HDD’s temperature is overheated.
The email settings can be set in the NETWORK SETUP MENU.
6. STOP RECORD
YES: Stop recording when HDD’s temperature is overheated.
NO: Will not stop recording even when HDD’s temperature is overheated.
7. SET TEMPERATURE:
When HDD’s temperature is higher than the temperature set here, all other active settings in HDD
TEMP will take effect (BUZZER, ALARM OUTPUT, ALARM DURATION, NETWORK
ALARM, SEND EMAIL, STOP RECORD). The default value is 60C (140F).
To Next Page
Loading...
