evertz TR-4800E - Specifications; Rear General Purpose Inputs; Rear General Purpose Outputs; Front General Purpose I;O (+Bp16 Option Only)

TR-4800E
Tally Router
Revision 1.1 Page - 3
2 SPECIFICATIONS
2.1 REAR GENERAL PURPOSE INPUTS
Number of GPIs: 32
Connectors: 2 x D-Subminiature DC-37 female sockets, each with 16 GPI
Maximum Voltage: +/- 24 Volts DC
Protection: Current limit, approximately 10mA – 15mA.
Wet Power: Provided on +WET and –WET pins (isolated from chassis ground)
2.2 REAR GENERAL PURPOSE OUTPUTS
Number of GPIs: 48
Connectors: 3 x D-Subminiature DC-37 female sockets, each with 16 GPO
Maximum Voltage: +/- 24 Volts DC
Protection: Polyfuse, 0.15 Amps maximum
Wet Power: Provided on +WET and –WET pins (isolated from chassis ground)
2.3 FRONT GENERAL PURPOSE I/O (+BP16 OPTION ONLY)
Number of GPIOs: 16
Connectors: 2 x Standard banana connector binding posts per GPIO (red/black)
Maximum Voltage: +/- 24 Volts DC
Protection: Polyfuse, 0.15 Amps maximum
Wet Power: Switchable (12V/5V/External/None)
2.4 SERIAL PORTS
Number: 2
Connector: Female DB-9
Level: RS232 or RS422 software selectable
Baud Rate: 115200 baud
Format: 8 data bits, no parity, 2 stop bits
Function:
Serial 1 Port: Configuration: Command Line Interface
Serial 2 Port: Control: Quartz Protocol
2.5 ETHERNET PORT
Network Type: Gigabit Ethernet 1000Base-T IEEE 802.3z
Connector: RJ-45
SNMP Standard: SNMP v1 compliant (RFC-1157, RFC-1213)