evertz TR-4800E - Updating Vistalink with a New JAR File; Figure 3-1: Vistalink Pro Version Information

TR-4800E
Tally Router
Revision 1.1 Page - 23
4.2.1 Updating VistaLINK® with a New JAR File
The VistaLINK
®
Pro client provides an interactive and visual interface to configure and monitor the tally
router. This interface is stored in a JAR file. The JAR file for the TR-4800E is named
“VLProProd_TR4800E.jar”. In order to recognize and display the graphical configuration for the tally
router, VistaLINK
®
Pro must first be updated with this JAR file. Future versions of VistaLINK
®
Pro will
have the 5601MSC JAR built-in, however newer versions of the JAR will occasionally be released by
Evertz, usually in conjunction with new versions of firmware.
To see which version of the JAR is being used, open the VistaLINK
®
Pro client and select the “Tools”
menu, go to “Products…” and select the “V
ersion Information…” menu item.

All JAR updates are available to download from the Evertz website (www.evertz.com). The
TR-4800E is listed under the “Routers” section.
Figure 3-1: VistaLINK® Pro Version Information
In the Version Information dialog window, all of the JAR files that are contained within the VistaLINK
®
Pro client are listed on the left. Scroll down the list to the TR4800E. Once selected, the product
version is displayed. In the example above, the TR4800E JAR file version 6 is being used. If the
TR4800E does not appear in the list, then VistaLINK
®
will have to be updated.