EVS LSM Connect - Page 52

How to Assign a Keyword
To be able to assign keywords with LSMConnect, a current keyword list has to be
imported from the Maintenance menu, or defined in the Multicam settings, Operation tab,
Keywords section, Keyword file field. See section "Customization Settings" on page
100.
To assign a keyword, proceed as follows:
1. Tap a KW field.
2. Tap the required keyword from the Pick Keyword dialog box.
3. Tap OK.
The keyword is displayed in the toolbar.
How to Assign an Icon
To assign an icon, proceed as follows:
1. Tap the Icon field
2. Select the requested icon from the Pick an Icon dialog box.
The dialog box closes, and the icon is directly assigned to the clip.
NOTE
You can also use the above-mentioned keyboard shortcuts to assign
an icon.
How to Assign a Color
To assign a color, proceed as follows:
1. Tap the Color field.
2. Select the requested color from the Pick a Color dialog box.
The dialog box closes, and the color is directly assigned to the clip, and displayed in a thin
bar on the left of the clip box in the grid view or the clip row in the list view.
NOTE
You can also use the above-mentioned keyboard shorcuts to assign a
color.
How to Remove a Keyword, Icon or Color
To remove a keyword, icon or color, tap the cross on the right of the field whose value you
want to unassign.
The value is removed from the field.
44 3. Clip Management
EVS Broadcast Equipment SA Issue 2.12.D- April 2020