Playlist with 1:00 sec Effect Duration
In an LSM playlist, the video and audio effects end at the OUT point of a clip, so the
duration of clips is shortened by the length of the effect.
Available Video Transition Effects
The following video transition effects can be defined:
Effect Type Description
Cut No transition effect is applied between both elements.
Mix Dissolve effect between both elements.
Wipe The last frame of the previous element is gradually replaced
by the first frames of the next element.
The wipe effect is shown as a vertical line moving across the
video. The direction of the wipe effect (left to right, right to
left) is defined in the Wipe type parameter in the Operational
Setup menu (p.3.1 F4).
Fade from color (<) A fade out effect from a defined color is applied on the first
frame of the clip (on which the effect is defined). The
previous clip ends in cut mode.
In the drawing below, the previous clip is displayed in red, the
next clip is green, and the fade in black:
OPERATION MANUAL Multicam LSM 12.05
5. Playlist Management 105
To Next Page
Loading...
Need help?
General
