Connect Function (F9)
This option calls the CONNECT window. This window allows the operator to connect to
the clips and record trains of other machines on the network.
The following functions can be used in the CONNECT window:
• ALT+L: return to LOCAL mode and close the CONNECT window
• ALT+C: CLIPS mode - to connect to the clips of a remote machine
• ALT+R: RECORD mode - to connect to the record trains of a remote machine
• ALT+P: CLIP+REC mode - to connect to the clips and record trains of a remote
machine.
After selecting CLIP, RECORD or CLIP+REC mode either with the keyboard or by
clicking with the stylus, select the machine you want to connect to: click on it with the
stylus, or move with the arrow keys and press ENTER on the keyboard.
Pressing ALT+L or clicking with the stylus on “LOCAL” will close the CONNECT window
and return to local clips and record trains.
To close the CONNECT window without changing the connection mode or remote
machine, press ESC.
The “*” next to one of the machine in the list indicates which machine is the active network
server. "Operation on XNet Network" on page 173 for details.
46 4. Clip Management
EVS Broadcast Equipment SA Issue 12.05.A- May 2014
To Next Page
Loading...
Need help?
General
