Excell SI-132 - Automatic Power-Off Timer Setting

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
15
2-3-2 Automatic Power-off Timer Setting
Select in the General Function setting mode to
change the automatic power-off timer setting.
LCD displays the last status
Automatic power-off function
When the weight on weigh pan is less than 10d or keeps idle for the set time, the
scale will automatically switch off.
Press TARE key
Use ON/ZERO or UNITS
key to key in parameter
Press TARE key to go
back to the Advanced
function setting menu
ACTIONS
DISPLAY NOTE
ON/ZERO key
⇒
Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
Automatic power-off timer setting
Use ON/ZERO or UNITS key to key in
parameter
0 ⇒ No auto power-off
1 ⇒ When the scale is idle for 1
minute, the scale
automatically switches off
2 ⇒ When the scale is idle for 2
minutes, the scale
automatically switches off
9 ⇒ When the scale is idle for 9
minutes, the scale
automatically switches off