Excell SI-132 User Manual

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
16
lb
lb
lb
lb
2-3-3 Hi/Lo/OK Function Setting
Select in the General Function setting mode to
set the Hi/Lo/OK function. This function is available in all unit modes. In
one specific unit mode, enter to set the Hi/Lo/OK values.
4 When the high limit and low limit are both set as “0”, the Hi/Lo/OK function is
disabled.
ACTIONS
DISPLAY NOTE
LCD displays the last status
Press TARE key
Key in the desired high
limit value
Press TARE key
Key in the desired low limit
value
Press TARE key
Key in the parameter
setting for alarm
Press TARE key
LCD displays the last status
LCD displays the last status
.
.
.
.
Alarm setting
(a) (b) (c)
The definition of a, b, c positions:
(a) ⇒ 1 = beep sound on
0 = beep sound off
(b) ⇒ 1 = beep sound on when stable
0 = beep sound on when unstable
(c) ⇒ 1 = beep sound on when the weight is
between high and low limits
0 =
beep sound on when the weight is not
between high and low limits and
higher than 10d
ON/ZERO key
⇒
Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.

Excell SI-132 Specifications

General

Brand	Excell
Model	SI-132
Category	Scales
Language	English