Excell SI-132 User Manual

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
22
Press TARE key
Key in the parameter 00 ~
08
Key in the parameter “00”,
then press TARE key to
exit RS232 serial interface
settings
2-5 RS232 SERIAL INTERFACE SETTINGS
In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time
to enter the Advanced Function setting mode. The LCD shows and
use the NET/GROSS or UNITS key to select to enter the RS232
serial interface setting mode.
4 RS232 serial interface settings span ~ ,
8 settings.
ACTIONS
DISPLAY
NOTE
ON/ZERO key
⇒
Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
⇒ Exit the RS232 serial interface setting mode
⇒ Baud rate setting
⇒ Communication protocol setting
⇒ Output format setting
⇒ Continuous transmission setting
⇒ The selection of continuous transmission rate
⇒ Auto Transmission at Zero
⇒ Reset of Auto Transmission
⇒ Output condition setting

Excell SI-132 Specifications

General

Brand	Excell
Model	SI-132
Category	Scales
Language	English