Excell SI-132 User Manual

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
18
2-3-5 Noise Filter Setting
Select in the General Function setting mode to
set the noise filter setting.
4 When modifying , the parameters of remain un-altered.
4 In approved models, set as 1 or 3, setting is not available
Returning to the zero point setting
Use ON/ZERO or UNITS key to key in the
parameters or zero point
Default setting = 0
0 ⇒ No skip 5 ⇒ skip 5d
1 ⇒ skip 1d 6 ⇒ skip 6d
2 ⇒ skip 2d 7 ⇒ skip 7d
3 ⇒ skip 3d 8 ⇒ skip 8d
4 ⇒ skip 4d 9 ⇒ skip 9d
4 When the weight on the scale is over
1/3 full capacity, the function is on.
Digital switch & Stabilization range
setting
LCD displays the last parameter setting
Filter parameter setting
LCD displays the last parameter setting
Returning to zero point setting
LCD displays the last status
Filter parameter setting
Use ON/ZERO or UNITS keys to key in
the parameters. Default setting = 5
Parameter 0 ~ 9, the larger the number,
the faster the filter response. Fast
response can lead to weight instability.
Digital switch & Stabilization range
setting
Use ON/ZERO or UNITS keys to key in
the parameters. Default setting = 0
Parameter 0 ~ 9, the larger the number
the
more stable the weight.
ACTIONS
DISPLAY
NOTE
Press TARE key
Use ON/ZERO or UNITS
key to key in the
parameters
Press TARE key
Use ON/ZERO or UNITS
key to key in the
parameters
Press TARE key
Use ON/ZERO or UNITS
key to key in the
parameters
Press TARE key

Excell SI-132 Specifications

General

Brand	Excell
Model	SI-132
Category	Scales
Language	English