Excell SI-132 - Restore to the Default Setting

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
17
2-3-4 Restore to the Default Setting
Select in the General Function setting mode to
restore to the default setting.
4 The default setting includes the following:
1) External weight calibration
2) HI/LO/OK setting value
3) Noise filter setting (External)
4) Sampling setting for the counting function
4 In approved models, set as 1 or 3, setting is not
available.
ACTIONS
DISPLAY NOTE
⇒ Return (Cancel the
restoration)
⇒
Restore to the default
setting
Press TARE key
Use ON/ZERO or UNITS
keys to select “return”
or
“format”
Press TARE key
ON/ZERO key
⇒
Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.