EasyManua.ls Logo

Extec E-7 - Application and Limitations

Default Icon
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 1 Page 15
E
-
7
1.13.3 Hydraulic Equipment
Work on hydraulic equipment must be carried out by persons having special
knowledge and experience of hydraulic systems.
Check all lines, hoses and screwed connections regularly for leaks and obvious
damage. Repair damage immediately. Splashed oil may cause injury and fire.
Always relieve pressure from the hydraulic system before carrying out any kind of
maintenance or adjustment.
Depressurise all system sections and pressure pipes (hydraulic system,
compressed air system) to be removed in accordance with the specific instructions
for the unit concerned before carrying out any repair work.
Hydraulic and compressed air lines must be laid and fitted properly. Ensure that no
connections are interchanged. The fittings, lengths and quality of the hoses must
comply with the technical requirements.
Only fit replacement components of a type recommended by the manufacturer
Always practice extreme cleanliness servicing hydraulic components.
Hydraulic fluid under pressure can penetrate the skin causing serious injury.
If fluid is injected under the skin, it must be surgically removed or gangrene will
result. Get medical help immediately.
Always use a piece of cardboard to check for leaks. Do not use your hand.
1.13.4 Hazardous Substances
Ensure that correct procedures are formulated to safely handle hazardous materials
by correct identification, labelling, storage, use and disposal, all strictly in
accordance with the manufacturers’ instructions and that all applicable regulations
are observed at all times.
A full list of Substances Hazardous to health associated with this equipment can be
found in the appendix of this document
Section 2 Page1
Section 2 Description and Technical Information
Contents
2.1
Description Application & Limitations
Page
Number 2
2.2 Description 2
2.3 Operation Description 2
2.4 Key Features 3
2.5 Common Applications 3
2.6 Machine Layout Indicating Main Components 4
2.7 Machine Layout Indicating Emergency Stop Positions 5
2.8 Data 6
2.9 E-7 Transport Dimensions 7

Table of Contents

Related product manuals