Extec E-7 - Page 26

E-7
DAILY MAINTENANCE SCHEDULE
Check service indicators on Air Cleaner. Regardless of condition of service indicator, remove
outer element from air cleaner as shown below and clean using compressed air. Always clean
element from inside to outside.
(NOTE:- Service indicators are for showing when elements need to be replaced, not cleaned.)
S
e
r
v
i
c
e
I
n
d
i
c
a
t
o
r
Check service indicator
Loosen clips & remove
outer element
Never
clean the inner safety element.
After 5 outer element services, replace
both
the inner and outer elements.
Remove radiator service guard
Check coolant level and refill if
necessary (use 50% antifreeze)
R
a
d
i
a
t
o
r
C
a
p
Clean outer element and replace. Refit rear
cover ensuring clips are tightened properly.
Section 4 Page3
E-7
DAILY MAINTENANCE SCHEDULE
Check hydraulic oil level
Remove panel and refill
hydraulic oil if necessary
Check condition of screen mesh
and tension
Check condition of belt scrapers
and adjust if necessary
REMEMBER TO MAINTAIN YOUR TRACKS
1) Check your track rollers and idler wheels for possible leakage.
2) Check the track surface of the track rollers, idler wheels, track shoes
and drive sprockets for wear and loose mounting bolts.
3) Listen for abnormal noises when the machine is moving slowly.
1
2
3
1) Idle Roller
2) Relief Valve
3) Track Surface
Section 4 Page4