Extra 300L - Default Nav Page

Section 925
GARMIN GNC 420W
925 - 8 Page Date: 31. March 2009
Pilot´s Operating Handbook
EXTRA 300L
925.7.2 DEFAULT NAV PAGE
During most flights, the default NAV, map and NAVCOM pages will be the primary pages used for
navigation. The default NAV page displays a graphic course deviation indicator (CDI), the active leg
of your flight plan (as defined by the current „from“ and „to“ waypoints), and six user-selectable data
fields. The default settings for these fields are distance to waypoint (DIS), desired track (DTK),
bearing to waypoint (BRG), ground speed (GS), ground track (TRK) and estimated time en route
(ETE). The default NAV page is selected by pressing and holding the CLR key or turning the small
right knob.