Extreme Networks ExtremeSwitching VDX 6740 - Flush-Front Mounting the Device in the Rack

FIGURE 18 Rack kit parts
1. Front brackets (2)
2. Bracket extensions (2)
3. Rear brackets, short (2)
4. Rear brackets, medium (2)
5. Rear brackets, long (2)
6. Screw, 8-32 x 5/16-in., panhead Phillips (8)
7. Screw, 8-32 x 5/16-in., athead Phillips (16)
8. Screw, 6-32 x 1/4-in., panhead Phillips (8)
9. Screw, 10-32 x 5/8-in., panhead Phillips (8)
10. Retainer nut, 10-32 (8)
Ensure that the items listed and illustrated are included in the kit. Note that not all parts may be used with certain installations depending
on the device type.
CAUTION
Use the screws specied in the procedure. Using longer screws can damage the
device.
Flush-front mounting the device in the rack
CAUTION
The device must be turned o and disconnected from the fabric during this
procedure.
Flush-front mounting the device in the rack
ExtremeSwitching VDX 6740 Hardware Installation Guide
9036108-00 37