NOTE
You may need two people to install the device, one to support the device, while the other secures it into the rack.
CAUTION
Use the screws specied in the procedure. Using longer screws can damage the
device.
Parts list
The following parts are provided with the 1U and 2U Flush-Mount Rack Kit for Two-Post Racks (XBR-000307 and XBR-R000293):
FIGURE 36 Rack kit parts
1. Front brackets, right and left (2)
2. Rear brackets, right and left (2)
3. Screw, 8-32 x 5/16-in., panhead Phillips (12)
4. Screw, 10-32 x 5/8-in., panhead Phillips (8)
5. Retainer nut, 10-32 (8)
Installing the 1U and 2U Flush-Mount Rack Kit for Two-Post Racks (XBR-000307 and XBR-R000293)
ExtremeSwitching VDX 6740 Hardware Installation Guide
9036108-00 57
To Next Page
Loading...
