5. Adjust the brackets to the rack depth and tighten all the 6-32 x 1/4-in. screws to a torque of 9 in-lb (10 cm-kg).
FIGURE 28 Attaching the short rear brackets to the extensions at the front of the device
1. Rear brackets, short 2. Screws, 6-32 x 1/4-in., panhead Phillips
Flush-rear (recessed) mounting the device in the rack
ExtremeSwitching VDX 6740 Hardware Installation Guide
48 9036108-00
To Next Page
Loading...
