Summit WM User Guide, Software Version 5.3 139
To download a new Altitude AP software image:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 From the left pane, click WAP Maintenance. The WAP Software Maintenance tab is displayed.
3 In the Download WAP Images list, type the following:
z FTP Server - The IP of the FTP server to retrieve the image file from.
z User ID - The user ID that the controller should use when it attempts to log in to the FTP server.
z Password - The corresponding password for the user ID.
z Confirm - The corresponding password for the user ID to confirm it was typed correctly.
z Directory - The directory on the server in which the image file that is to be retrieved is stored.
z Filename - The name of the image file to retrieve.
z Platform - The AP hardware type to which the image applies. The are several types of AP and
they require different images.
4 Click Download. The new software image is downloaded.
To define parameters for an Altitude AP controlled software upgrade:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 From the left pane, click WAP Maintenance. The WAP Software Maintenance tab is displayed.
3 Click the Controlled Upgrade tab.
To Next Page
Loading...
