Mobility
Summit WM User Guide, Software Version 5.3258
5 From the Port drop-down list, click the port on the Summit WM Controller to be used for the
mobility agent process. Ensure that the port selected is routable on the network.
6 In the Heartbeat box, type the time interval (in seconds) to wait for a connection establishment
response before trying again.
NOTE
The mobility agent's heartbeat value should be similar to mobility manager's heartbeat value.
7 From the Discovery Method drop-down list, click one of the following:
z SLPD - Service Location Protocol Daemon is a background process acting as a SLP server. It
provides the functionality of the Directory Agent and Service Agent for SLP. Use SLP to support
the discovery of Extreme service to attempt to locate the area mobility manager controller.
z Static Configuration - Select Static Configuration if you want to enter the IP address of the
mobility manager manually. Defining a static configuration for a mobility manager IP address
bypasses SLP discovery.
8 In the Mobility Manager Address box, type the IP address for the designated mobility manager.
9 To save your changes, click Save.
Displays for the mobility manager
For more information, see "Viewing displays for the mobility manager" on page 283.
To Next Page
Loading...
