Extreme Networks Summit WM - Viewing the System Information and Manufacturing Information Displays

Summit WM User Guide, Software Version 5.3 281
3 In the Admission Control Statistics by Altitude AP display, click a registered Altitude AP to display
its information:
4 The Admission Control Statistics by Altitude AP lists the TSPEC statistics associated with this
Altitude AP:
z AC - Access class where TSPEC is applied,
z Direction - Uplink, Downlink or Bidirectional,
z MDR - Mean Data Rate
z NMS - Nominal Packet Size
z SBA - Surplus Bandwidth (ratio)
The following two statistics are of the measured traffic:
z Rate - Rate in 30 second intervals (uplink and downlink)
z Violation - Number of bits in excess in the last 30 seconds (uplink and downlink)
Viewing the System Information and Manufacturing Information
displays
System Information - Displays system information including memory usage and CPU and board
temperatures.
Manufacturing Information - Displays manufacturing information including the card serial number
and CPU type and frequency.