Extreme Networks Summit WM - Performing system administration; Performing Altitude AP client management

Summit WM User Guide, Software Version 5.3 297
11 Performing system administration
This chapter describes system administration processes, including:
z "Performing Altitude AP client management" on page 297
z "Defining management users" on page 301
z "Configuring the network time" on page 303
z "Configuring Web session timeouts" on page 305
Performing Altitude AP client management
There are times when for business service or security reasons, you want to cut the connection with a
particular wireless device. You can view all the associated wireless devices, by MAC address, on a
selected Altitude AP and do the following:
z Disassociate a selected wireless device from its Altitude AP.
z Add a selected wireless device's MAC address to a blacklist of wireless clients that will not be
allowed to associate with the Altitude AP.
z Backup and restore the Summit WM Controller database. For more information, see the Summit WM
Maintenance Guide.
Disassociating a client
In addition to the following procedure below, you can also disassociate wireless users directly from the
Active Clients by WM-AD page. For more information, see Chapter 10, "Working with reports and
displays."