Extreme Networks Summit WM - Altitude AP

Configuring the Altitude AP
Summit WM User Guide, Software Version 5.360
Altitude AP
The Altitude AP is meant for indoor environments. It can be mounted on walls or ceilings, using special
brackets, and can be kept completely out of sight.
The Altitude AP is available in the following models:
z Altitude 350-2i - Internal antenna, internal dual (multimode) diversity antennas
z Altitude 350-2d - External antenna (dual external antennas), RP-SMA connectors
Altitude AP radios
The Altitude AP is equipped with two radios - radio 11a and radio 11b/g. The following is a block
diagram of the Altitude AP equipped with external antennas.
Figure 4: Altitude AP block diagram