Extreme Networks Summit WM - Working with Friendly Aps

Working with the Summit WM series Spy
Summit WM User Guide, Software Version 5.3270
Working with friendly APs
To view the friendly APs:
1 From the main menu, click Summit Spy. The Summit Spy page is displayed.
2 Click the Friendly APs tab.
To add friendly APs manually:
1 From the main menu, click Summit Spy. The Summit Spy page is displayed.
2 Click the Friendly APs tab.
3 To add friendly access points manually to the Friendly AP Definitions list, type the following:
z MAC Address - Specifies the MAC address for the friendly AP
z SSID - Specifies the SSID for the friendly AP
z Channel - Specifies the current operating channel for the friendly AP
z Description - Specifies a brief description for the friendly AP
4 Click Add. The new access point is displayed in the list above.
To delete a friendly AP:
1 From the main menu, click Summit Spy. The Summit Spy page is displayed.
2 Click the Friendly APs tab.
3 In the Friendly AP Definitions list, click the access point you want to delete.