Performing system administration
Summit WM User Guide, Software Version 5.3304
4 From the Continent or Ocean drop-down list, click the appropriate large-scale geographic grouping
for the time zone.
5 From the Country drop-down list, click the appropriate country for the time zone. The contents of
the drop-down list change, based on the selection in the Continent or Ocean drop-down list.
6 From the Time Zone Region drop-down list, click the appropriate time zone region for the selected
country.
7 Click Apply Time Zone.
NOTE
Changing the Time Zone causes the Summit WM Controller to reboot.
8 Select the Use System Time radio button.
You can modify the system's date and time by changing the entries in the Use System Time text box.
The date is in mm-dd-yyyy format and the time is in hh:mm format.
9 Click Apply.
10 Reboot the Summit WM Controller. The WLAN network time is synchronized in accordance with the
Summit WM Controller's time.
Configuring the network time using the NTP
To configure the network time using the NTP:
1 Perform Steps 1 to 7 of "Configuring the network time using the system's time" on page 303.
2 Select Use NTP radio button.
To Next Page
Loading...
