Summit WM User Guide, Software Version 5.3 149
WM-AD global settings
Before defining a specific WM-AD, define the global settings that will apply to all WM-AD definitions.
These global settings include:
z Configuring the location and password of RADIUS servers on the enterprise network. The defined
servers appear as available choices when you set up the authentication mechanism for each WM-AD.
z Defining the shared secret used to encrypt the Pairwise Master Key (PMK) for WPA2 v.2 pre-
authentication between Summit WM Controllers on the network.
z Enabling Dynamic Authorization Server (DAS) configuration support.
NOTE
You should enable Dynamic Authorization Server (DAS) only if you have DAS Server deployed on your network.
z Adjusting admission control thresholds. Admission control thresholds protect admitted traffic
against overloads, provides distinct thresholds for VO and VI, and distinct thresholds for roaming
and new streams.
z Defining Bandwidth Control Profiles. The Bandwidth Control Profiles you define appear as available
choices in Bandwidth Control Profiles menu when you set up QoS policy for WM-ADs.
Defining RADIUS servers for Global Settings
To define RADIUS servers for WM-AD global settings:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domains list is
displayed.
2 In the left pane, click Global Settings. The Authentication tab is displayed.
To Next Page
Loading...
