Summit WM User Guide, Software Version 5.3 349
RF safety distance
The antennas used for this transmitter must be installed to provide a separation distance of at least 25
cm from all persons and must not be co-located or operating in conjunction with another antenna or
transmitter.
Canada
Industry Canada Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-
003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils Numeriques,"
NMB-003 edictee par le Industrie Canada.
This device complies with Part 15 of the FCC Rules and Canadian Standard RSS-210. Operation is
subject to the following conditions:
z This device may not cause harmful interference.
z This device must accept any interference received, including interference that may cause undesired
operation.
z This Class B digital apparatus complies with Canadian ICES-003.
z Operation in the 5150-5250 MHz band is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
z Please note that high power radars are allocated as primary users (meaning they have priority) and
can cause interference in the 5250-5350 MHz and 5470-5725 MHz bands of LE-LAN devices.
z For the product available in the Canadian market, only channels 1 to 11 can be operated. Selection of
other channels in the 2.4 GHz band is not possible.
z The maximum antenna gain permitted for the AP35X operating in the 5250-5350 MHz band to
comply with the e.i.r.p. limit is 4.3 dBi for the internal antenna and 5 dBi for the default external
antenna that is shipped with the unit. To comply with the e.i.r.p. limit with the optional external
antennas, refer to Table 40.
z The maximum antenna gain permitted for the AP35X operating in the 5725-5825 MHz band to
comply with the e.i.r.p. limit is 4.3 dBi for the internal antenna and 5 dBi for the default external
antenna that is shipped with the unit. To comply with the e.i.r.p. limit with the optional external
antennas, refer to Table 40.
z The maximum antenna gain permitted for the AP45X operating in bands 5250-5350 MHz and 5470-
5725 MHz to comply with the e.i.r.p. limit is 6 dBi for the internal antenna and 5 dBi for the external
antenna.
z The maximum antenna gain permitted for the AP45X operating in the 5725-5825 MHz band to
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as
appropriate is 6 dBi for the internal antenna and 5 dBi for the external antenna.
To Next Page
Loading...
