Regulatory information
Summit WM User Guide, Software Version 5.3350
Canada Conformance Standards
This equipment meets the following conformance standards:
Safety
z C22.2 No.60950-1-03
z UL 2043 Plenum Rated as part of UL 60950-1. Suitable for use in environmental air space in
accordance with Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1
EMC
z ICES-003, Class B
Radio transceiver
z RSS-210 (2.4 GHz and 5 GHz)
Other
z IEEE 802.11a (5 GHz)
z IEEE 802.11b/g (2.4 GHz)
z IEEE 802.11n (AP45x)
z IEEE 802.3af (PoE)
Altitude 350-2d/Altitude 451 optional 3rd party external antennas
The Altitude 350-2d/Altitude 451 external antenna APs can also be used with optional certified 3rd
party antennas. However, in order to comply with the local laws and regulations, an approval may be
required by the local regulatory authorities. The following optional antennas have been tested with and
approved for use with the external antenna model.
CAUTION
When using an approved 3rd party external antenna (other than the default), the power must be adjusted according
to Table 42 and Table 43.
Professional installation
This device must be professionally installed. The following are the requirements of professional
installation:
z The device cannot be sold retail to the general public or by mail order. It must be sold to dealers.
z Installation must be controlled.
z Installation must be carried out by licensed professionals (equipment sold to dealers who hire
installers)
z Installation requires special training (special programming and antenna and cable installations)
To Next Page
Loading...
