Summit WM User Guide, Software Version 5.3 237
b From the Reports & Displays menu, click Altitude AP Availability. The Altitude AP
Availability Report is displayed.
c Check the statement on the top of the page (as marked in the above screen shot).
If the statement reads Availability link is up, the availability feature is configured correctly. If the
statement reads Availability link is down, check the configuration error in logs. For more
information on logs, see the Summit WM Maintenance Guide.
Session availability
The session availability feature enables the Altitude APs to switch over to a standby (secondary)
Summit WM Controller fast enough to maintain the session availability (user session) in the following
scenarios:
z The primary Summit WM Controller goes down
To Next Page
Loading...
