Summit WM User Guide, Software Version 5.3 257
4 Select the This Summit Controller is a Mobility Manager option. The mobility manager options
appear.
5 In the Port drop-down list, click the interface on the Summit WM Controller to be used for the
mobility manager process. Ensure that the selected interface is routable on the network.
6 In the Heartbeat box, type the time interval (in seconds) at which the mobility manager sends a
Heartbeat message to a mobility agent.
NOTE
If the mobility domain is configured for fast failover and session availability, you should configure the mobility
manager's heart beat time as one second.
7 In the SLP Registration drop-down list, click whether to enable or disable SLP registration.
8 In the Permission list, click the agent IP addresses you want to approve that are in pending state, by
selecting the agent and clicking Approve. New agents are only added to the domain if they are
approved.
You can also add or delete controllers that you want to be part of the mobility domain. To add a
controller, type the agent IP address in the box, and then click Add. To delete a controller, click the
controller in the list, and then click Delete.
9 Select the Security Mode option:
z Allow all mobility agents to connect - All mobility agents can connect to the mobility manager.
z Allow only approved mobility agents to connect - Only approved mobility agents can connect to
the mobility manager.
10 To save your changes, click Save.
NOTE
If you set up one Summit WM Controller on the network as a mobility manager, all other Summit WM Controllers
must be set up as mobility agents.
To designate a mobility agent:
1 From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration page is displayed.
2 In the left pane, click Mobility Manager. The Mobility Manager Settings page is displayed.
3 To enable mobility for this controller, select the Enable Mobility checkbox. The controller mobility
options are displayed,
4 Select the This Summit Controller is a Mobility Agent option. The mobility agent options are
displayed.
To Next Page
Loading...
