WM Access Domain Services configuration
Summit WM User Guide, Software Version 5.3190
4 From the Filter ID drop-down list, click Default.
The Filtering tab automatically provides a Deny All rule already in place. This rule can be modified
to Allow All, if appropriate to the network access needs for this WM-AD.
Default filter examples
The following are examples of filtering rules for a default filter:
Table 19: Default filter example A
In Out Allow IP / Port Description
x x Intranet IP, range Deny all access to an IP range
x x Port 80 (HTTP) Deny all access to Web browsing
x x Intranet IP Deny all access to a specific IP
x x x *.*.*.*. Allow everything else
Table 20: Default filter example B
In Out Allow IP / Port Description
x Port 80 (HTTP) on host IP Deny all incoming wireless devices access to Web
browsing the host
x Intranet IP 10.3.0.20, ports 10-30 Deny all traffic from the network to the wireless
devices on the port range, such as TELNET (port 23)
or FTP (port 21)
x x Intranet IP 10.3.0.20 Allow all other traffic from the wireless devices to
the Intranet network
To Next Page
Loading...
