Summit WM User Guide, Software Version 5.3 227
NOTE
You must first assign the 'parent' role to the Altitude APs that will serve as the parents. Unless this is done, the
Parent Altitude APs will not be displayed in the Preferred Parent and Backup Parent drop-down lists of other Altitude
APs.
NOTE
The WDS Bridge feature on the user interface relates to WDS Bridge configuration. When you are configuring the WDS
Bridge topology, you must select WDS Bridge for Satellite Altitude AP that is connected to the wired network. For
more information, see "Wireless Bridge configuration" on page 213.
To assign the roles, preferred parent and backup parent:
a From the radio b/g drop-down list of the Root Altitude APs - Ardal, Arthur, Athens and
Auberon, click Parent.
b From the radio a drop-down list of the Root Altitude APs - Ardal, Arthur, Athens and Auberon,
click Parent.
c From the radio a and radio b/g drop-down list of other Altitude APs, click the roles according to
Table 27.
d From the Preferred Parent drop-down list of other Altitude APs, click the parents according to
Table 27.
e From the Backup Parent drop-down list of other Altitude APs, click the backup parents
according to Table 27.
10 To save your changes, click Save.
To Next Page
Loading...
