Summit WM User Guide, Software Version 5.3 249
6 In the Interface IP addr box, type the secondary Summit WM Controller's interface IP address.
7 From the Interface drop-down menu, select the secondary Summit WM Controller's physical port.
8 Click Create. The system creates a WM-AD peer on the secondary Summit WM Controller by
copying the WM-AD parameters.
9 Verify that the session availability feature is configured correctly.
To verify the session availability feature is configured correctly:
a From the main menu of either of the two controllers, click Reports and Displays. The Reports &
Displays page is displayed.
To Next Page
Loading...
