EasyManua.ls Logo

Extreme Networks Summit WM - Page 290

Extreme Networks Summit WM
380 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Working with reports and displays
Summit WM User Guide, Software Version 5.3290
Acct-Authentic Indicates how the user was authenticated, whether by
RADIUS (AAA), Local (Internal CP) or Remote (External CP).
The field displays one of the following values:
1 - AAA authentication
2 - Internal CP authentication
3 - External CP authentication
Framed-IP-Address Indicates the address to be configured for the user
Connect-Info This field is sent from the NAS to indicate the nature of the
users' connection - 802.11b for Radio b/g or 802.11a for
radio a.
NAS-Port-Type Indicates RADIUS NAS Port Type is Altitude 802.11
Called-Station-ID The Altitude AP's MAC address.
Calling-Station-ID The client's MAC address.
Extreme-AP-Serial The Altitude AP's serial number.
Extreme-AP-Name The Altitude AP's name.
Extreme-WM-AD-Name The WM-AD name on which the session took place.
Extreme-SSID The SSID name on which the session took place.
Acct-Session-Time The number of seconds the user has received the service.
Acct-Output-Packets The number of packets that were sent to the port in the
course of delivering this service to a framed user.
Acct-Input-Packets The number of packets that have been received from the port
over the course of this service being provided to a Framed
User.
Acct-Output-Octets The number of octets that were sent to the port in the course
of delivering the service.
Acct-Input-Octets The number of octets that were received from the port over
the course of the service.
Acct-Terminate-Cause Indicates how the session was terminated. The field displays
one of the following values:
1 - User Request
4 - Idle Timeout
5 - Session Timeout
6 - Admin Reset
11 - NAS Reboot
16 - Callback
17 - User Error
Authenticated_time Indicates the time at which the client was authenticated. The
time is in the following format: Date hh:mm:ss. For example,
April 21 2008 14:50:24
Disassociation_time Indicates the time at which the client was disassociated from
the Altitude AP. The time is in the following format: Date
hh:mm:ss. For example, April 21 2008 14:57:20.
Table 28: CDR Records and their description (Continued)
CDR Records Description

Table of Contents

Other manuals for Extreme Networks Summit WM

Related product manuals