Performing system administration
Summit WM User Guide, Software Version 5.3302
z The user_admin list displays Admin users who have read/write privileges.
z The user_read list is for users who have read only privileges.
3 From the Group drop-down list, click Admin or Read only.
4 In the User ID box, type the user ID for the new user. A User ID can only be used once, in only one
category.
5 In the Password box, type the password for the new user.
6 In the Confirm Password, retype the password.
7 Click Add User. The new user is added to the appropriate user list.
To modify a Summit WM management user:
1 From the main menu, click Summit Controller Configuration. The Summit Controller
Configuration page is displayed.
2 In the left pane, click Login Management. The Local Authentication tab is displayed.
3 Click the user you want to modify.
4 In the Password box, type the new password for the user.
5 In the Confirm Password, retype the new password.
6 To change the Password, click Change Password.
To remove a Summit WM Controller management user:
1 From the main menu, click Summit Controller Configuration. The Summit Controller
Configuration page is displayed.
2 In the left pane, click Login Management. The Local Authentication tab is displayed.
To Next Page
Loading...
