Summit WM User Guide, Software Version 5.3 359
Other
z IEEE 802.11a (5 GHz)
z IEEE 802.11b/g (2.4 GHz)
z IEEE 802.11n (AP45x)
z IEEE 802.3af (PoE)
RoHS
z European Directive 2002/95/EC
Altitude 350-2d/Altitude 451 optional 3rd party external antennas
The Altitude 350-2d/Altitude 451 external antenna APs can also be used with optional certified 3rd
party antennas. However, in order to comply with the local laws and regulations, an approval may be
required by the local regulatory authorities. The following optional antennas have been tested with and
approved for use with the external antenna model.
CAUTION
When using an approved 3rd party external antenna (other than the default), the power must be adjusted according
to Table 47 and Table 48.
Professional installation
This device must be professionally installed. The following are the requirements of professional
installation:
z The device cannot be sold retail to the general public or by mail order. It must be sold to dealers.
z Installation must be controlled.
z Installation must be carried out by licensed professionals (equipment sold to dealers who hire
installers)
z Installation requires special training (special programming and antenna and cable installations)
The intended use is generally not for the general public. Instead, it is generally for industry/commercial
use.
Table 46: List of ETSI approved antennas - Altitude 350-2d and Altitude 451
# Model Location Type Gain (dBi) Frequency (MHz)
Huber+Suhner
#1 SOA
2454/360/7/20/DF
outdoor-capable omni 6
8
2400-2500
4900-5875
#2 SPA
2456/75/9/0/DF
outdoor-capable planar
2 or 1 inputs
9 2400-2500
5150-5875
#3 SPA
2400/80/9/0/DS
outdoor-capable planar
2 inputs
8.5 2300-2500
To Next Page
Loading...
