Extreme Networks Summit WM - Page 376

SpectraLink Wireless Telephones
Summit WM User Guide, Software Version 5.3376
NOTE
It is recommended that the Tx Diversity should be set to Left.
6 Retain the default values for all other parameters.
7 Click Save.
To set up the radio for Voice Wireless LAN in Altitude 802.11n APs:
1 From the main menu, click Altitude AP Configuration. The Altitude AP Configuration screen is
displayed.
2 From the list of Altitude APs, select the Altitude 802.11n AP that is being used for the Voice WLAN.
3 On the Altitude AP Configuration screen, click 802.11b/g/n or 802.11a/g/n, depending upon the
radio that is being used for Voice WLAN.
4 Under Base Settings, set the DTIM Period to 3.
5 Retain the default values for all other parameters.
6 Click Save.