Configuring the Summit WM Controller
Summit WM User Guide, Software Version 5.340
NOTE
The local DHCP Server is useful as a general purpose DHCP Server for small subnets.
9 Type the following:
z In the From box, type the starting IP address of the IP address range from which the local DHCP
Server will allocate the IP addresses to the Altitude APs.
z In the To box, type the ending IP address of the IP address range from which the local DHCP
Server will allocate the IP addresses to the Altitude APs.
Use the Exclusion button to exclude the IP addresses from allocation by the DHCP Server. The
Summit WM Controller automatically includes the IP addresses of the Interfaces (Ports), and the
default gateway in the exclusion list. You can not remove these IP addresses from the exclusion
list.
To exclude the IP addresses from allocation by the DHCP Server:
a Click on the Exclusion button. The DHCP Address Exclusion window opens.
To Next Page
Loading...
