Extreme Networks Summit WM - Page 57

Summit WM User Guide, Software Version 5.3 57
3 From the Continent or Ocean drop-down list, click the appropriate large-scale geographic grouping
for the time zone.
4 From the Country drop-down list, click the appropriate country for the time zone. The contents of
the drop-down list change based on the selection in the Continent or Ocean drop-down list.
5 From the Time Zone Region drop-down list, click the appropriate time zone region for the selected
country.
6 To apply your changes, click Apply Time Zone.
To set system time parameters:
1 From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration page is displayed.
2 In the left pane, click Network Time. The Network Time page is displayed.
3 To use system time, select the Use System Time radio button.
4 Type the time setting in the Use System Time box, using the mm-dd-yyyy hh:mm format.
5 To apply your changes, click Apply.
To set Network Time Protocol:
1 From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration page is displayed.
2 In the left pane, click Network Time. The Network Time page is displayed.
3 To use Network Time Protocol, select the Use NTP option.
4 In the Use System Time box, type the time setting using the mm-dd-yyyy hh:mm format.
5 In the Time Server 1 box, type the IP address or FQDN of a standard NTP Time Server. You can
repeat this step for the Time Server 2 and Time Server 3 boxes.