Extreme Networks VSP 4900 Series User Manual

• Use plenum-rated cable when it is necessary for safety and re rating requirements.
Consult your local building codes to determine when it is appropriate to use
plenum-rated cable, or refer to IEC standard 850.
• Keep all ports and connectors free of dust.
Figure 17: Properly Installed and Bundled Cable
1 = Ensure adequate slack and bend radius
Handle Fiber Optic Cable
Fiber optic cable must be handled carefully during installation.
Every cable has a minimum bend radius and bers will be damaged if the cables are
bent too sharply. It is also important not to stretch the cable during installation. Ensure
Preparing to Install Install Cable
VSP 4900 Series Switches: Hardware Installation Guide 37

Extreme Networks VSP 4900 Series Specifications

General

Brand	Extreme Networks
Model	VSP 4900 Series
Category	Switch
Language	English