Extreme Networks VSP 4900 Series User Manual

To perform the initial login and complete initial conguration tasks, follow these steps
from the management console.
1. Using a terminal emulator such as PuTTY or TeraTerm, connect to the switch using
the serial port connection.
Be sure that your serial connection is set properly:
• Baud rate: 115200
• Data bits: 8
• Stop bit: 1
2. Press [Enter] one or more times until you see the login prompt.
3. At the login prompt, log in using the default user name rwa.
For example:
login: rwa
When prompted for the password, enter rwa.
When you are logged in with the role-based authentical level of rwa, you can
congure the login and password values for the other role-based authentication
levels. For details, see
Quick Start Conguration for VOSS .
4. Follow the steps for provisioning and verifying the switch in Quick Start
Conguration for VOSS .
The switch is ready for use.
To congure security, see Conguring Security .
To congure other switch features, see Documentation Reference .
Activating and Verifying the Switch Congure the Switch for Use
VSP 4900 Series Switches: Hardware Installation Guide 55

Extreme Networks VSP 4900 Series Specifications

General

Brand	Extreme Networks
Model	VSP 4900 Series
Category	Switch
Language	English