DXP HD 4K PLUS Series • SIS Configuration and Control 74
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
IP Control Port Commands (continued)
Passwords
NOTES:
• The factory configured passwords for all accounts on this device have been set to the device serial
number. If the unit is reset to factory settings, these passwords are set to no password.
• Passwords are case-sensitive.
• The pipe (|) character is invalid for passwords.
• A password cannot be a single space.
Set administrator password
EX4@CA} Ipa•X4@]
Set the administrator
password.
Clear administrator password
E•CA} Ipa•]
Reset or clear the
administrator password.
View administrator password
ECA} ****] or ]
View the administrator
password. If there is
a valid password, the
response is ****]. If
there is no password, the
response is ].
Set user password
EX4@CU} Ipu•X4@]
Set the user password.
Clear user password
E•CU} Ipu•]
Reset or clear the user
password.
View user password
ECU} ****] or ]
View the user password. If
there is a valid password,
the response is ****]. If
there is no password, the
response is ].
KEY:
X4@ = Password
0 to 128 characters
To Next Page
Loading...
