IN1804 Seamless Scaling Switchers • SIS Configuration and Control 78
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Backup and Restore Configuration
Save unit configuration
E
1*
X8%
XF
}
Cfg1*
X8%]
Back up the current unit configuration as
type
X8%
to a file on the IN1804.
Restore unit configuration
E
0*
X8%
XF
}
Cfg0*
X8%]
Restore the saved configuration, type
X8%
.
KEY:
X8%
= Configuration type
0 = IP configuration (ip.cfg)
2 = Unit-specific parameters (box.cfg)
NOTE: Configuration files are stored in the directory /nortxe-backup, created on the unit by the Save command.
Information Requests
General information
X!
*I Vid
X!
•Typ
X#
•Amt
X1)
•Vmt
X4@
•Hrt
X1#
•Vrt
X1#]
Verbose modes 2 and 3:
Inf00*Vid
X!
•Typ
X#
•Amt
X1)
•Vmt
X4@
•Hrt
X1#
•Vrt
X1#
]
View video input signal type, audio mute
status, video mute status, and horizontal
and vertical frequencies.
View model name
1I
X3%]
Verbose modes 2 and 3:
Inf01*
X3%
]
View the IN1804 model name.
View unit description
2I
Seamless•Scaling•Switcher
]
Verbose modes 2 and 3:
Inf02*Seamless•Scaling•Switcher
]
View the IN1804 series description.
Query firmware version
Q n.nn
]
Verbose modes 2 and 3:
Ver01*n.nn
]
View the firmware version to the second
decimal place.
Query full firmware version
*Q n.nn.nnnn
]
Verbose modes 2 and 3:
Bldn.nn.nnnn
]
View the firmware version with its build
number.
KEY:
X!
= Input selection
1 = DisplayPort input 1 (all models)
2 = HDMI or DVI input 2 (all models)
3 = HDMI or DVI input 3 (all models)
4 = HDMI or DVI (standard and DO models)
TP (IN1804 DI and DI/DO)
X#
= Digital video format
0 = No signal, 1 = DVI, 2 = HDMI, 3 = DisplayPort
X1)
= On or off, enable or disable
0 = Audio unmuted, 1 = Audio muted
X1#
= Horizontal and vertical frequencies
nnn.nn. Response is three digits with two decimal places, padded
with zeros.
X3%
= Model name
IN1804, IN1804 DI, IN1804 DO, or IN1804 DI-DO
X4@
= Video output mute
0 = Unmute, 1 = Mute to black screen, 2 = Mute video and sync
To Next Page
Loading...
