Extron electronics SSP 200 - SSP 200 Features

SSP 200 • Introduction 2
SSP 200 Features
• Supports the latest immersive 3D audio formats as well as legacy surround
formats:
• Dolby Atmos • DTS:X
• Dolby TrueHD • DTS-HD Master Audio
• Dolby Digital Plus • DTS-HD High Resolution Audio
• Dolby Surround • DTS Neural:X
• Dolby Digital EX • DTS-ES
• Dolby Digital • DTS 96/24
• Dolby Pro Logic IIx • DTS NEO:6
• Dolby Pro Logic II
• Automatic surround sound format detection and decoding — Automatically
detects the format of the incoming audio signal, applies the necessary decoding, and
then sends signals to the appropriate outputs.
• Supports video resolutions up to 4K/60 @ 4:4:4 — Supports video signal passed
through unaltered.
• Upmix listening mode converts source program into immersive or standard
surround playback — Converts from any input format to any selected higher output
channel count format.
• Integrated test signals for calibration and connectivity validation during set up.
• Pink noise generator to calibrate a speaker interaction within the environment.
• Dolby Noise: bandpass noise generator to balance speaker levels.
• External option: Can use test disc, or other calibration sources for specific decoding
outputs.
• EXP expansion output port — Provides easy I/O connection to an Extron
DMPPlusSeries audio DSP processor. This allows for a higher output count and
seamless integration with all DMP capabilities including Dante transport.
• Lip Sync Offset — 0 ms to 300 ms per input.
• Supports commonly used speaker output configurations:
• 5.1, 7.1, and 5.1.2 with stereo downmix on outputs 9 and 10.
• 5.1.4, 7.1.2, and 7.1.4 with stereo downmix on the EXP expansion bus.
• EXP expansion bus connection to a DMP Plus Series processor is required for
7.1.4.
• Supported HDMI 2.0b specification features include data rates up to 18 Gbps,
HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats.
• HDMI Loop Output supports Downmix:
• Local monitor output audio modes.
• Original Audio – Multichannel or two channel.
• Stereo Downmix – Independent of speaker output configuration.
• No Audio.