Extron electronics SSP 200 - PCS Help File; Updating Firmware Using PCS; Downloading the SSP 200 Firmware

SSP200 • Product Configuration Software 58
PCS Help File
For assistance, Extron PCS Help contains
information about using the program to configure
the SSP200.
To access Extron PCS Help, click the button in
the right corner of the PCS program screen (see
the image on the right,
1
) and click
Extron PCS Help (
2
).
Updating Firmware Using PCS
Firmware for the SSP 200 can be updated using PCS. Updates to the SSP200 firmware
are made available periodically via the Extron website. You can find out what version
of firmware is currently loaded on your SSP200 by entering the SISQcommand via the
RS‑232, USB, or LAN interface (see Firmware Version/Part Number/Information
Queries on page69) or listed in Hardware Settings in PCS (see Hardware Settings
on page52).
Downloading the SSP 200 Firmware
To download the latest version of firmware for the SSP200:
1. Go to www.extron.com, and mouse over the DOWNLOAD tab (see figure53,
1
).
Figure 53. Download Tab
2. Click the Firmware link (
2
) from the drop‑down list. The Firmware page opens (see
figure54).
Figure 54. Firmware Page with the Alphabetic Navigation Bar
3. Click the letter S on the alphabetic navigation bar (
1
).
53
54