Extron electronics SSP 200 - Product Configuration Software; Downloading PCS from the Extron Website

SSP200 • Product Configuration Software 29
Product
Configuration
Software
The SSP 200 surround sound processor can be configured using Extron Product
Configuration Software (PCS). This section describes:
• Downloading PCS from the Extron Website
• Using PCS Software
• Updating Firmware Using PCS
Downloading PCS from the Extron Website
Visit www.extron.com to download and install the PCS software. An Extron Insider
Account is required and then the PCS program can be downloaded free of charge.
NOTE: Also you can download the latest version of firmware for your product (see
Updating Firmware Using PCS starting on page58).
1. Mouse over the Download tab at the top of the homepage (see figure23,
1
).
Figure 23. PCS Software Link on Download Tab
2. Click the Software link (
2
) or, if the software is listed, click directly on the PCS
Product Configuration Software link (
3
).
The PCS window opens with the current available version (see figure24).
Figure 24. PCS Software Download Link
3. Click Download (
1
) and follow the on‑screen instructions.
23
24