Extron electronics SSP 200 - General Settings

SSP200 • Product Configuration Software 50
General Settings
General Settings
Click the General Settings button (see figure26,
3
, on page31).
The General Settings panel (see figure46) allows you to adjust:
• Dolby Settings
• DTS Settings
• Dynamic Range Compression
• Mono Settings
• Front Panel Lockout (Executive Mode)
The General Settings panel also allows you to access:
• Hardware Settings
• Communication Settings (after opening the Hardware Settings panel)
Figure 46. General Settings
Dolby Settings
Depending on the listening environment, listener preference, or both, reducing the dynamic
range of an audio program may be desirable. To limit the dynamic range, Dolby TrueHD
DRC Mode applies dynamic range compression to the Dolby TrueHD audio content. When
dynamic range compression is applied, the high audio levels of content are cut (attenuated)
and the low levels are boosted (amplified).
Using the Virtualizer Mode on a Dolby signal gives you the effect of a virtual height
and surround effect from traditional speaker layouts without the use of height speakers in
systems with more than 2 channels.
46