Extron electronics SSP 200 - Connecting to the USB Port

SSP 200 • Panel Features 16
Connecting to the USB Port
Use the USB mini‑B port on the front panel to connect the processor to a host computer to
configure the unit with PCS or SIS commands.
1. Connect a USB A to mini‑B cable between the front panel USB CONFIG port and a
USB port on the PC (see figure14).
WiFi
1234
USB Cable
Type A
USB
Mini Type B
USB
USB
Ports
PC
SSP 200
e
SSP 200
CONFIG
DTS
D
PCM
2-CH
DTS: X
ATMOS
HDCP
EXP
SURROUND SOUND PROCESSOR
SOURCE INPUT VOLUME
1 2 3 4 5
Figure 14. Connecting a PC to the SSP 200 Front Panel USB Port
If this is the first time the SSP200 has been connected to the PC, the Found New
Hardware Wizard opens (see figure15).
The first screen offers to connect to Windows Update to search the web for the
appropriate driver needed for the USB port to communicate with the SSP 200. This is
not necessary if the USB driver is already on your PC.
1
2
3
4
Figure 15. Found New Hardware Wizard Opening Screen
2. Click on the appropriate radio button (see figure15).
• Select the Yes, this time only radio button (
1
) if you want your computer to
connect to Windows Update only this one time.
14
15